Download Ubiquiti Networks Network & Wireless Cards Driver

  1. Download Ubiquiti Networks Network & Wireless Cards Drivers
  2. Download Ubiquiti Networks Network & Wireless Cards Drivers
  3. Ubiquiti Network Controller
  4. Ubiquiti Network Setup
  5. Download Ubiquiti Network Controller Software
  6. Ubiquiti Networks Downloads
83 downloads·Added on: December 24, 2016·Manufacturer: Ubiquiti

Important Note:

Download Ubiquiti Networks UniFi Switch device template by clicking on the download link above. In your OpManager client, go to Settings → Configuration → Device Templates and click on the Import link to browse and import the Ubiquiti Networks UniFi Switch device template. Ubiquiti Drivers. 1,641 drivers total Last updated: Jul 29th 2020, 10:33 GMT RSS Feed. Latest downloads from Ubiquiti in Network Card. Sort by: last update. Ubiquiti RM2-Ti Antenna Firmware 6.3.2.33267 22 downloads. Network Card Ubiquiti.

- Version 6.0 is recommended for PTMP Mixed mode usage (M clients connected to AC AP)

New:

  • Download Ubiquiti PBE-M5-300 Bridge Firmware 6.0.19 (Network Card). It is highly recommended to always use the most recent driver version available. Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched.
  • Ubiquiti Networks Nanostation M2 2.4GHz Indoor/Outdoor Wireless w/ POE & CORD 5 out of 5 stars (26) 26 product ratings - Ubiquiti Networks Nanostation M2 2.4GHz Indoor/Outdoor Wireless w/ POE & CORD.

- New: airMAX AC client mode support (AP must be upgraded to airOS8 and PTMP Mixed mode selected)
- New: Don't do full restart on most configuration changes
- New: Added signal per chain reporting for AirControl v2
- New: Add kernel crashlog into Support info for better troubleshooting
- New: Added Crash log reporting to Ubiquiti Networks for better troubleshooting
- New: Added 'default-mru' key in ppp/options file to disable MRU negotiation
- New: Added MRU negotiation Enable/Disable option
- New: Store configuration backup if upgrade fixer is changing it
- New: Enable Block management access on WAN when switching to Router mode
- New: Dynamic DNS configuration via system.cfg
- New: Added option allowing LLDP packets to pass wireless bridge
- New: DHCP Option configuration via system.cfg
- New: Update dropbear to v2016.74
- New: OpenSSL update to v1.0.2h
- New: lighttpd update to v1.4.39
- New: Linux kernel update to v2.6.32.71

ControllerNetwork

Regulatory Updates:

Download Ubiquiti Networks Network & Wireless Cards Drivers

- ETSI EN 301 893 v1.8.1 adaptivity improvements
- Update 5GHz band for China: add 5180-5240MHz and 5260-5320MHz channels
- Revised UNII Rules activation for NanoStation M5, NanoStation Loco M5 and LiteBeam M5 23

Improvements:

- Reduce false positives and misclassifications of invalid DFS radar events
- airMAX security improvements
- MAC authentication process improvement while RADIUS server is not reachable
- Various vulnerability/security changes
- Stability improvements
- Performance issue when XM device runs out of memory

Fixes:

Cards

- Fix: Set CPU speed to 400MHz to eliminate out of band emission for Verizon (XM series)
- Fix: AP drops stations when another AP with the same SSID is running on the same frequency
- Fix: Stability fixes (random AP/Station reboots)
- Fix: RADIUS MAC Authentication fails in case server isn't reachable
- Fix: Can't SSH to Mikrotik devices
- Fix: Do not load NAT helpers modules when NAT is disabled
- Fix: DNS Proxy binds not just to LAN but to WAN port also
- Fix: MSS Clamping for PPPoE is not enabled when Management VLAN is configured
- Fix: Generate unique SSL certificate for each device
- Fix: Generate SSL certificate start date from firmware build timestamp
- Fix: Crontab does not work with multiple scheduler/commands
- Fix: AirMax Capacity reports over 100 percent with Legacy devices
- Fix: Site Survey doesn't report full list of available APs
- Fix: Show full EdgeSwitch firmware version in Device Discovery
- Fix: Device Name with not allowed symbols breaks DHCP
- Fix: Impossible to log in with SSH authorisation keys
- Fix: French language translation issue
- Fix: Change antenna reporting to Chain0/Chain1 instead of Vertical/Horizontal for all Rocket models
- Fix: Wrong TX Power reporting from command line 'iwlist ath0 txpower' (XW)
- Fix: DHCPv6 doesn't after PPPoE session reinitialisation
- Fix: Revised UNII Rules activation/deactivation for products manufactured after 06/01/2016 (due to changes in the FCC rules)
- WEB UI: Updated Chinese translation
- WEB UI: More statistics on Main page (CPU/Memory usage)
- WEB UI: Added DFS Events monitoring list on the Main page
- WEB UI: Switch antenna Chain0/Chain1 mapping to Horizontal/Vertical for PowerBeams

About Firmware Updates:

Applying a newer firmware version than the one already installed on your unit can bring various enhancements, include workarounds for diverse problems encountered by the device, and improve or add newly developed features.
On the other hand, downgrading the firmware version can recover the device’s functionality in the event of a software update either turning up faulty or causing the unit’s overall performance to drop. However, bear in mind that applying an older firmware isn’t recommended and might not always be possible.
When it comes to the update steps, due to the large variety of devices and numerous ways for installing a new firmware, it is recommended that you carefully read and understand the upgrade steps, and consider applying a different firmware only when you have familiarized yourself with the update method.
As the installation process is most of the times quite risky, this step should be taken by users that have the ability to successfully complete the update; regular users may initiate it at their own risk. Moreover, it’s best that this task be performed in a steady power environment such as the one ensured by a UPS unit.
Therefore, if you consider applying this release, hit the download button, take into account all the aforementioned aspects, and update the device’s firmware. Also make sure you constantly check with our website to ensure that you don’t miss a single new release.

It is highly recommended to always use the most recent driver version available.
Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

COMPATIBLE WITH:
OS Independent
file size:
7 MB
filename:
XW.v6.0.30097.161219.1705.bin
CATEGORY:
Network Card

Ubiquiti launches the Ubiquiti Speed Test, a public test network integrated with enterprise network equipment. Ubiquiti Speed Test comprises a network of test servers and built-in speed test capabilities. Reports include uplink/downlink throughput and latency. Sharing the results is easy via email or social media.

Ubiquiti Speedtest provides throughput and latency data

Public and Private Test Servers

Ubiquiti Speed Test provides a global network of test servers with growing density. The network consists of Ubiquiti servers and privately hosted servers. Service providers, businesses, and private users can host public or private test endpoints.

Download Ubiquiti Networks Network & Wireless Cards Driver

By hosting their own test server, service providers will be better able to troubleshoot customers’ connectivity issues. In addition, employees and IT staff will get more accurate results even at higher speeds, and tests may be performed between multiple locations. Service providers also benefit from brand visibility, as the provider name is always visible in the test window and WiFiman app.

Setting Up a Test Server is Easy

To set up a test server, you need the following:

  • Linux server or VM: Ubuntu is our recommendation. Required CPU capacity is low.
  • Stable full duplex 1 Gbps internet connection for public hosting. For rural and limited internet infrastructure areas, slower connections may be acceptable.
  • Static public IP address.
  • Go to https://speed-admin.ui.com/ for easy setup.
  • The Docker image is updated automatically after setup.

Download Ubiquiti Networks Network & Wireless Cards Drivers

For creating your test endpoint, just run the installer on your server. You only need to provide your company name and company webpage address.

Multiple Ways to Run Tests

Tests may run over LAN, Wi-Fi, or mobile networks. Ubiquiti Speed Test uses Ubiquiti test endpoints and provides automated and manual test target selection. The automated selection uses a combination of geolocation and latency measurements for determining the best servers. The algorithm may use several parallel endpoints for the best measurement accuracy.

Ubiquiti Network Controller

Users may run tests anywhere with a browser at: http://speed.ui.com/

By using the UniFi Network Controller,enterprises may run automated scheduled speed tests between their sites. UniFi Controller offers statistics for performance and network capacity.

The Ubiquiti WiFiman app includes embedded speed test capabilities. In addition, WiFiman includes a simple connectivity dashboard for identifying the reason for a connectivity issue.

Ubiquiti Network Setup

WiFiman app provides Speedtest and troubleshooting information

Download Ubiquiti Networks Network & Wireless Cards Driver

Download Ubiquiti Network Controller Software

Download the WiFiman App

Ubiquiti Networks Downloads

Creation of our own speed test network allows Ubiquiti to continue leading in the development of innovative new products covering private and public networks.