Download Webscan USB Devices Driver

The only problem with it, is that, it reload the latest driver when you plug the device on a never used USB port. So, if you change place of connection, you should manually set the driver to 3.3, but you have to do that only the first time you used this port. Next time, the driver remain to 3.3 and never upgrade to 3.6.

Huawei USB COM 1.0 USB SER USB Driver: Download. How to install Huawei USB Driver. Firstly, you need to download the USB Driver on your Computer. Extract the ADB USB Driver using WinRAR or 7zip. Right-click on my computer and then click on manage. Check on the left side there you can see the Device Manager option. Connect the SD with either the card reader or the GT itself and the USB cable; Highlight the card in the update agent, and select “select device” 4. Select your device (40417, 40420, etc.) then select “download and upgrade” 5. Wait for the download to finish, you will see this message. When you plug the device into your USB, Windows will look for the associated driver, if it cannot find this driver then you will be prompted to insert the driver disc that came with your device. Common USB Device errors are ‘ usb port not working ‘, ‘device descriptor request failed error’ or ‘bugcodeusbdriver’ issues. The best place to download a driver is direct from the hardware manufacturer. Before you can update a driver, you'll need to find and download the latest version. Drivers downloaded from the manufacturer will be the most tested and up to date available.

All drivers support the following OS

  • Windows 10, 8.1, 8, 7 with Service Pack 1 (SP1)
  • Windows Server 2016, 2012, 2008 R2

Main Drivers

WBF (Windows Biometric Framework) drivers are the main drivers for most applications that use SecuGen fingerprint readers and devices containing SecuGen fingerprint USB sensors.

This installs WBF drivers for the following devices:

  • Hamster IV (HSDU04P, HFDU04)
  • Hamster Plus (HSDU03P, HSDU03M, HFDU03FR/FRS)
  • Hamster Pro 10 (HU10)
  • Hamster Pro 20 (HU20, HU20-A, HU20-AP)
  • Hamster Pro Duo CL (XU20CL)
  • Hamster Pro Duo SC/PIV (XU20SCA, XU20SCI, XU20SCP, XU20ASCA)
  • ID-USB SC (XSDU03PSC, XSDU03MSC)
  • ID-USB SC/PIV (XSDU04PSC, XFDU04SC)
  • OptiMouse Plus (MSDU03P, MSDU03M, MFDU03FR/FRS)
  • USB Sensors (FDU03FR/FRS, FDU04, SDU03M, SDU03P, SDU04P, U10, U20, U20-A, U20-AP, U20-ASF-U)
Download Webscan USB Devices Driver

This supplies the WBF drivers for manual installation of the following devices:

  • All of the devices listed above
  • Hamster Pro (HUPx)
  • USB Sensor (UPx)

Legacy Drivers

Some third party software that support SecuGen devices might require “Legacy” drivers instead of the main (WBF) drivers.

This installs legacy drivers for the following devices:

Free Usb Drivers Download

  • Hamster IV (HSDU04P, HFDU04)
  • Hamster Plus (HSDU03P, HSDU03M, HFDU03FR/FRS)
  • Hamster Pro 10 (HU10)
  • Hamster Pro 20 (HU20, HU20-A, HU20-AP)
  • Hamster Pro Duo CL (XU20CL)
  • Hamster Pro Duo SC/PIV (XU20SCA, XU20SCI, XU20SCP, XU20ASCA)
  • ID-USB SC (XSDU03PSC, XSDU03MSC)
  • ID-USB SC/PIV (XSDU04PSC, XFDU04SC)
  • OptiMouse Plus (MSDU03P, MSDU03M, MFDU03FR/FRS)
  • USB Sensors (FDU03FR/FRS, FDU04, SDU03M, SDU03P, SDU04P, U10, U20, U20-A, U20-AP, U20-ASF-U)

Individual legacy driver for manual installation of devices based on:

  • UPx sensors (e.g. Hamster Pro, HUPx)

Individual legacy driver for manual installation of devices based on:

  • U10 sensors

Individual legacy driver for manual installation of devices based on:

Usb Video Device Driver Update

Driver for usb video device
  • U20 sensors

Individual legacy drivers for manual installation of devices based on:

  • U20-A sensors
  • U20-AP sensors
  • U20-ASF-U sensors
Download Webscan USB Devices Driver

Individual legacy drivers for manual installation of devices based on:

Unknown Usb Device Driver Download

  • FDU02 sensors
  • FDU03 / SDU03 sensors
  • FDU04 / SDU04 sensors

Other Downloads

SecuGen Fingerprint Management Application
(64-bit) (32-bit)

For Windows 7 only: Install this after installing the WBF driver. The FMA is used to enroll and manage fingerprints within Windows Biometric Framework applications on Windows 7 only. (FMA is not needed for later versions of Windows because the enroll and manage functions are natively included in those versions of Windows.)

For U20 and U10 type of devices only: Use this tool to configure the Fake Finger Rejection threshold and enable logging of events for devices based on the following sensors: U10, U20, U20-A, U20-AP