Drivers Weblink Usb Port Devices

  • If the device is not yet connected, first install the device-specific driver, such as by using the appropriate installer. After the device-specific driver is installed, Windows 10 will select that driver instead of the standard USB audio 2.0 driver when you first connect the device.
  • What's new with Weblink 5.0? New user-friendly interface; Install type selection by starter and/or alarm make and model; Save your favorite configurations for one-click flashing.
  • Recommended Resolution. Reinstall the device driver manually. From Start, search for device manager and select Device Manager from the results. Right-click the device in the list. Select Uninstall from the menu that appears. After the device is uninstalled, choose Action on the menu bar. Select Scan for hardware changes to reinstall the driver. Note You may be prompted to provide the path.
  • Emulates a COM port or an Ethernet device, that generates a serial stream of data. The program can create a data flow, wrap it to data packets (RS232, TCP/IP or UDP) and send to a port ComEmulator.zip.

The new Intel Android* USB Driver package 1. 9.0 is available for download at the Intel Developer Zone. It enables you to connect your Windows*-based machine to your Android* device that contains an Intel® Atom™ processor inside. This includes the latest Intel® Atom™ x3 and x5 processor families and supported host systems with Windows* 8.1 (32/64-bit) and Android devices including those with Android* 4.4 – Kit Kat and Android* 5.x – Lollipop.

Drivers weblink usb port devices download

List all devices - Select the driver (for example usb2serWin764.inf) - from the List select 'MediaTek Preloader USB VCOM Port' (or you can install other drivers from the list if Preloader is not enough.).

USB drivers for Android devices are platform-specific, and there is no guarantee that this Intel USB driver will work for every OEM device. Since most OEMs develop the USB driver for all devices that they sell, we recommend that you also check out the Android* OEM USB driver page that lists the OEM drivers.

This installation instructions document will guide you through installing the Intel® Android* USB Driver package which will enable you to connect your Windows* based machine to your Android device that contains an Intel® Atom™ processor inside.

Usb

Supported USB profiles

After installing the USB driver package, plug in your Android* device to your computer using your micro-USB to USB cable. The following are the supported USB profiles via the Intel Android USB Driver package:

  • ADB (Android Debug Bridge): This is the debug interface of Android. It is mandatory to use in order to re-flash, and debug.
  • MTP (Media Transfer Protocol): This is the Windows* protocol to facilitate the transfer of media files.
  • PTP (Picture Transfer Protocol): This is the Windows* protocol to allow the transfer of images from digital cameras to computers.
  • RNDIS: This provides a virtual Ethernet link using phone network.
  • CDC Serial (Modem AT Proxy): This provides the link to Modem to allow to use AT commands through a virtual com port.

Troubleshooting Errors

Device is not recognized at all

These drivers are only for Intel® devices. If you’re using a device from one of our OEM, please get the drivers directly from their web site, or you can use this list of drivers on the Android* site.

PortDevicesPort

Errors in the Windows* Device Manager

Open Windows Device Manager:

  • If USB Mass Storage is visible instead of ADB Device, then right click on the Mass Storage device icon and select ‘Uninstall’.
    Then unplug your device from the computer and install drivers’ setup again.
  • If Android Device is visible with a yellow warning icon, then right click on the Android Device icon and select ‘Uninstall’.
    Then unplug your device from the computer and install drivers’ setup again.

Portable Device but no Android Debug Bridge (ADB) profile

There may not be an enabled “USB Debugging” option. The developer options on a phone are hidden by default. Open the settings on a phone, and find the About section. Look through it until the 'Build number' entry is visible. Tap if five times in quick succession, and there should be a small dialog stating it’s now set to developer. Come back to Settings main menu and go into Developer Options, then enable USB Debugging.

Windows XP: When I activate MTP there is no pop-up to allow me to access phone file system or transfer media files.

MTP is not supported by default with Windows XP. You have to install Windows Media Player 10 or later.


Further Questions & Support

For other troubleshooting support, post questions on the Forum for Android* Applications on Intel® Architecture