Drivers Winchiphead Port Devices

If the device-specific driver is distributed through Windows Update, you can manually update the driver by using Device Manager. For more information about how to do this, see update drivers in Windows 10. If the device is not yet connected, first install the device-specific driver, such as by using the appropriate installer. +. ch341.c implements a serial port driver for the Winchiphead CH341. +. +. The CH341 device can be used to implement an RS232 asynchronous +. serial port, an IEEE-1284 parallel printer port or a memory-like +. interface. In all cases the CH341 supports an I2C interface as well. +. This driver only supports the asynchronous serial. +. ch341.c implements a serial port driver for the Winchiphead CH341. +. +. The CH341 device can be used to implement an RS232 asynchronous +. serial port, an IEEE-1284 parallel printer port or a memory-like +. interface. In all cases the CH341 supports an I2C interface as well. +. This driver only supports the asynchronous serial.

Info:

Model: USB RS232 Drivers
Vendor: Prolific
Version: 3.8.25.0, v.3.8.12.0

Drivers Winchiphead Port Devices Gigabit


Operating system: Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1, Windows 10
Bits:Drivers winchiphead port devices replicator 32-bit (x86), 64-bit (x64)
Driver Date: 2017-03-03
Size: 7.2 mb

Driver description

Download driver USB RS232 Drivers version 3.8.25.0, v.3.8.12.0 for Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1, Windows 10 32-bit (x86), 64-bit (x64).

Screenshot of files

File Name

WinChipHead.zip - WinChipHead (0.26 mb) v.3.4.2014.08 - 08.08.2014

hl-340-usb-to-serial-rs232.zip - WinChipHead альтернативный (0.06 mb) v.2.8.2007.09 - 24.09.2007

PL2303_Prolific_DriverInstaller_v1200.zip - Windows 7/8.1/10 (7.1 mb) v.3.8.25.0 (1.20.0) - 12.07.2018

Drivers Winchiphead Port Devices

PL2303-W10RS3RS4-DCHU-DriverSetup_v1192_20180503.zip - for Windows 10 RS3/RS4 (2.4 mb) v.3.8.18.0 (1.19.0) - 17.10.2017

PL2303_Prolific_DriverInstaller_v1180B.zip - Prolific (7.2 mb) v.3.8.12.0 - 03.03.2017

PL2303_Prolific_DriverInstaller_v130.zip - Prolific альтернативный (2.2 mb)

usb_com_drivers.zip - FTDI (3.1 mb) v.2.06.00 - 22.10.2009


Please, enter the answer to the following question

CH340 IC is a low cost USB to TTL converter IC. CH340g ICis used in low cost SMD Arduino UNO & Arduino Nano boards. Many USB to Serial converter IC’s are available in the market but this is a low cost IC that is gaining popularity. USB to TTL converter modules are also available based on this IC. Even Node MCU IOT modules also have this IC.

You can download the Drivers for CH340g from below

Download CH340g Driver for windows 7, 8 and windows 10

I have personally tested the above CH340 driver on windows 7 and it worked with the Arduino Nano, Node MCU and Arduino UNO clones.

Step By Step Installation of CH340g Drivers

Initially connect your hardware having CH340 USB to Serial IC to your PC. In the device manager it will show “USB2.0-Serial” (as shown in below figure) which means your ch340 driver has not been installed.

Now extract the CH340g drivers in a folder and in that you will find folder named “CH341SER” in which there will be a “setup” application file as shown below.

Drivers Winchiphead Port Devices Lucie

Open the setup file and a “Driver Setup” option will open. Just click on the install file.

This installation takes some time. In my laptop it took 1 minute so just have patience. Once installed it will show driver successfully installed. Now go again back to device manager and there you will see that the driver has been successfully been installed and a com port has been allotted. In below image you can see that “com19” has been allotted for ch340g IC in my laptop

Drivers Winchiphead Port Devices Replicator

Drivers for the ch340 IC has now been installed successfully. I have tested this drivers and installation process in Windows XP, windows 7. Will test is soon on Windows 8 & windows 10.

You can see in above image that Port Number 19 has been allocated to this IC. If you want you can even change the virtual com port number from Device Manager.

Drivers Winchiphead Port Devices Terminal

For MAC users you can check CH340 Installation Guide for MAC users

Please enable JavaScript to view the comments powered by Disqus.