Sysnucleus Hard Disk Controller Driver

If your RAID disks are not recognized by the Lazesoft WinPE boot disk, you need to load the proper RAID driver files for your RAID controller.

Hard Disk Motor Speed Controller using Arduino, Diy Sander– In this tutorial, you will learn how to turn your old Hard Disk Drive Brushless DC motor into an amazing Electric Sander. The HDD “Hard Disk Drive” Brushless DC motor speed will be controlled using a Potentiometer. The Hard Disk Motor Speed controller is based on the Arduino Nano. The disk controller (or 'hard disk controller') is the circuit which allows the CPU to communicate with a hard disk, floppy disk or other kind of disk drive. Early disk controllers were identified by their storage methods and data encoding. They were typically implemented on a separate controller card.

Here are the steps to load RAID controller driver files from Lazesoft WinPE boot disk:

  1. Find RAID controller driver of your computer for Windows Server 2008 R2. (If you do not know how to or cannot find Windows Server 2008 R2 driver for your RAID controller, please feel free to contact us at [email protected]
  2. Download the driver files package or setup file. And then extract the driver files.
  3. Install the new, downloaded version of the Lazesoft Recovery Suite.
  4. Launch the Lazesoft Recovery Suite.
  5. Click <Burn CD/USB Disk> on the home page of Lazesoft Recovery Suite
  6. Click <Options> on the welcome page of the Lazesoft Media Builder.
  7. Enable the option <Specify WinPE Version> and select <Windows 7 64 bit PE> (Windows 7 64 bit has same core with Windows 2008 R2).
  8. Click <OK> to save the options.
  9. Follow the Lazesoft Media Builder ‘wizard’ to create a WinPE boot disk.
  10. Copy the extracted the RAID controller driver files folder to a USB disk.
  11. Insert the USB Disk into your locked/target computer.
  12. Reboot your locked/target computer from the new burned Lazesoft WinPE boot disk
  13. On the home page of Lazesoft Recovery Suite boot disk, click <Load Drivers>, after boot disk is loaded.
  14. Load the driver file, *.inf, from the the extracted the RAID controller driver files folder.

If you do not know how to find and load your RAID drivers, please contact our technical staff with your computer brand name/model number and RAID controller brand name/model number. We will help you find the proper driver files, then reply with detailed steps to download and load RAID drivers.


Sysnucleus Hard Disk Controller Drivers

USBTrace is an easy to use and powerful USB analyzer (USB traffic sniffer) software. USBTrace can analyze USB protocol at host controllers, hubs and devices. This is a 100% software product. USBTrace supports Windows 2000, XP, 2003/2008 Server, Vista, Windows 7 and Windows 8/8.1 operating systems and works with USB 1.x, 2.0 and 3.0 (low, full, high & super speed) host controllers, hubs and devices.

USB 3.0 Support (Super Speed USB). (New)
Analyze USB 3.0 protocol at controllers and devices. Decodes 3.0 standard descriptors and requests.
Supports USB Device Class Decoding.
HID, Hub, Video, Audio, Mass Storage, Bluetooth,
Still Image Capture, Vendor Specific, WUSB HWAPrinter, CDC, Smart Card (CCID), PHDC, TMC
Complete Enumeration Monitoring.
Capture and Analyze all USB requests exchanged during device enumeration. Does not use filter drivers.
Search / Filter / Trigger / Export.
Search captured data. Filter out unwanted data.
Set trigger points. Export captured data.
Background/Continuous capturing.
For high performance/non-stop capture sessions.
Performance Statistics.
Detailed performance analysis for your device/driver.
Supports Windows 8/8.1. (New)
Supports the latest version of Windows. x86/x64 editions of all Microsoft Windows releases supported.

Featured Customers


Sysnucleus hard disk controller drivers

Key Features and Benefits of our USB protocol Analyzer

USBTrace is an invaluable tool for all those who develop/test firmware and drivers for devices which connect to the PC using the Universal Serial Bus.

Mass Storage Device
Bluetooth
Human Interface Device
Communication Device
Hub Class
Still Image Capture Device
Video
Audio
Vendor Specific
Wireless USB HWA
Printer
Smart Card Reader
PHDC
TMC
  • Easy to use
    USBTrace is an easy-to-use USB protocol analyzer. To analyze a USB device, just select the device and click the 'capture' button. See USBTrace Quick Start Guide.

  • Sniffs USB requests at all levels
    With USBTrace you can analyze USB protocol traffic at USB Host Controllers, USB Hubs and USB devices. The tool captures and displays USB Control, Bulk, Interrupt & Isochronous transfers.

  • Displays detailed device information
    USBTrace decodes and displays both standard and class specific USB descriptors (Device, Hub, Configuration, Interface, Endpoint, Class Specific, IAD, String) and Windows enumeration information.

  • USBTrace does not use any filter drivers
    Unlike other software based USB analyzers, USBTrace does not use any filter driver to capture the USB requests. So USBTrace will not disturb/slow down the PnP system due to its presence.

  • Captures all USB protocol data during device enumeration
    USBTrace is capable of capturing all USB requests exchanged between the host controller/hub and the device during device enumeration. See USB Enumeration Explained to know how USBTrace is different from other USB monitor software.

  • Define your own data decoding templates in XML
    In addition to automatically decoding standard/class specific USB requests/descriptors USBTrace also lets you define custom templates for decoding data buffer of requests in XML. Know more

  • Displays valuable information for device driver developers
    The IRP, URB and IO_STACK_LOCATION structures associated with each captured request is decoded and displayed by USBTrace. Also, in addition to capturing URBs, USBTrace captures Internal USB IOCTLs, User mode USB IOCTLs, PnP and Power IRPs. See Complete List of USB requests captured by USBTrace.

    USBTrace also allows device driver developers to capture USB requests made/received by any device object in the USB device stack.

  • Supports device class decoding / Write your own vendor specific class decoder
    USBTrace can decode class specific usb descriptors/requests and display detailed information regarding them. The classes currently supported are Hub, HID, Mass Storage, Bluetooth, Wireless USB HWA, Still Image Capture, Printer, Audio, Video, Smart Card, Vendor specific device class etc. Read more about USB device class decoding

  • Export Captured Data & Detailed Device Information
    Captured data can be exported as HTML, XML, Text or CSV reports. Detailed device information can also be exported. This feature will help you to document the device behavior as well as to share the captured data/device details in an easily readable form with others.

  • {For more details see USBTrace Features or Online Help Manual}

Sysnucleus Hard Disk Controller Driver

USBTrace USB Analyzer in Action

We recommend that you download the evaluation version or take the product tour to learn more about the features of our USB Analyzer.

Download USBTrace
Download and try the 15 days free evaluation version of USBTrace:
Download USBTrace
USBTrace Tour
Take the product tour to learn more about the features of USBTrace:
Take the Product Tour
Interactive Demo
View this interactive video demo to see how USBTrace works:
Launch the demo: Small : Large

Subscribe to updates

You may either subscribe to our mailing list, follow us on twitter or read our blog for updates.

Sysnucleus Hard Disk Controller Driver
Read our BlogFollow us on Twitter