Thesycon USB Devices Driver Download

Thesycon develop universal drivers, driver templates and development toolkits for Windows operating systems. It includes software toolkit for USB. The toolkit contains a generic device driver which provides Win32 applications with direct access to devices on the bus. Install Thesycon XMOS USB Audio driver for Windows 8 x64, or download DriverPack Solution software for automatic driver installation and update. You can also replace the existing device driver with libusb-win32 device driver if desired. This is the preferred way to use libusb-win32. When you use the Inf-Wizard GUI to replace a device with inbox driver (like HID or USB Mass Storage Device), you may need to repeat the process if you plug in a same device but with different serial number.

-->

This article helps to fix an issue in which Windows 10 doesn't install specific drivers for USB audio devices on the first connection.

Original product version: Windows 10, version 1703
Original KB number: 4021854

Symptom

When you connect a USB audio device to a Windows 10 Version 1703-based computer the first time, the operating system detects the device but loads the standard USB audio 2.0 driver (usbaudio2.sys) instead of the specific device driver.

Thesycon driver 4.86 download

Cause

Driver

This issue occurs because the USB audio 2.0 driver (usbaudio2.sys) isn't classified as a generic driver in Windows 10 Version 1703. Therefore, the system assumes that a compatible, nongeneric driver is installed for the device even though the driver is generic.

This issue also causes Windows 10 Version 1703 to postpone the search for other compatible drivers through Windows Update that typically occurs immediately after you install a new device.

Resolution

To fix this issue, use one of the following methods.

Thesycon Driver 4.86 Download

Method 1

To resolve this issue, install update 4022716.

Method 2

If the device-specific driver is distributed through Windows Update, you can manually update the driver by using Device Manager. For more information about how to do this, see update drivers in Windows 10.

Method 3

If the device is not yet connected, first install the device-specific driver, such as by using the appropriate installer. After the device-specific driver is installed, Windows 10 will select that driver instead of the standard USB audio 2.0 driver when you first connect the device.

Note

See the device manufacturer's user guide for specific instructions about how to install the driver.

Method 4

If the driver isn't distributed through Windows Update, you can manually reinstall the driver. To do this, follow these steps:

  1. Install the device-specific driver (see Method 2).
  2. Open Device Manager.
  3. Right-click (or tap and hold) the name of the device, and then select Uninstall.
  4. Restart the computer.

When it restarts, Windows will try to reinstall the device by using the device-specific driver.

Universal USB Development Kit for Windows 10, 8.1, 8 and 7

Thesycon USB Devices Driver Download

FeaturesSupported PlatformsDemoPrices

Standard USB devices are normally supported by class drivers included in the Windows operating system. In many cases, a particular USB device cannot be assigned to a device class because it has to fulfill different requirements, or because implementing the class specification in the device firmware is too time-consuming. This makes a custom USB device driver development necessary; a kernel-mode driver which conforms to the Windows Driver Model (WDM).

The development and debugging process of such a kernel-mode driver is very time-consuming, especially if the driver has to support different Windows versions. For this reason, Thesycon has developed the generic USB device driver USBIO. The USBIO software components can be integrated into a final product with product-specific adaptations (e.g. file names, installation paths, copyright messages). The result is a customized version that can be shipped as part of an end user product.

  • Complete USB functionality is supported. The driver is optimized for maximum efficiency. The USBIO driver supports USB 3.0, USB 2.0 and USB 1.1. It supports low, full, high speed and super speed mode.
  • The USBIO driver supports all current 32 bit and 64 bit Windows operating systems.
  • Supports the USB transfer types Control, Interrupt, Bulk, and Isochronous.
  • Provides an interface to USB endpoints (pipes) that is similar to Win32 file I/O interface.
  • Provides full support for asynchronous (overlapped) data transfer operations.
  • Fully support for hot plug and play. It supports Plug&Play notifications for applications.
  • Supports the Windows power management model.
  • Optionally the driver supports advanced USB power management including selective suspend (Windows 10 only)
  • Provides an interface to USB devices that can be used by any Windows 32/64 bit applications. Multiple applications can use the USBIO driver at the same time.
  • Can be used with devices that implement multiple USB configurations. It supports switching between different USB configurations.
  • Can be used with devices that implement multiple USB interfaces. In this case a multi-interface driver is required.
  • Multiple USB devices can be controlled by USBIO at the same time.
  • Provides a Windows programming interface for use in C, C++ and Java programs. A high-level programming interface, the USBIO COM interface, is also available.
  • Several source code examples demonstrate usage of the programming interfaces and show how an application controls a USB device.
  • The driver will be delivered fully customized for licensee’s product.
  • Customization includes USB VID/PID, file names, text strings, etc.
  • Windows 10 version of the driver is signed with Microsoft Attestation signing.
  • Windows 7/8 version of the driver is signed with Thesycon’s code signing certificate.
  • Driver Customization Kit add-on: The Driver Customization Kit enables licensee to customize the driver by themselves.
USB
  • Supported scenarios: first-time installation, driver update, removal of driver software
  • Interactive mode with graphical user interface
  • Silent mode without user interface, enables integration into surrounding software installers
  • Supports popup-free installation

The driver is conform with current WHQL and Hardware Lab Kit (HLK) requirements. To get a WHQL certification, HLK tests must be executed with licensee's device which can be done by licensee or Thesycon. If you are interested in a WHQL certification, please contact Thesycon for a quotation.


Windows 10
Windows 8.1
Windows 8
Windows 7


Windows Embedded 8 Standard
Windows Embedded Standard 7 (WES7)
Windows Embedded Enterprise 7
Windows Embedded POSReady 7
Windows Embedded Server


Windows Server 2012 R2
Windows Server 2012
Windows Home Server 2011
Windows Server 2008 R2


Our software is purely designed and implemented by our team in Germany - no outsourcing. Technical support is provided directly by the developers.

Current version: 3.40

To receive a free demo, prices or license agreement, please fill out the contact form.

The free evaluation version of the USBIO driver works for an interval of 60 days without any limitation. After that evaluation period has expired, the driver stops working.

Thesycon USB Devices Driver Download

Thesycon USB Devices Driver Download

NOTE: The driver described on this page is *not for use by end users*. It will not help solve any problems you may experience with a consumer device such as a webcam, camcorder, card reader, external sound card, etc. Thesycon’s device drivers are software components intended to be used by hardware or software manufacturers to create end products.

Thesycon Usb Driver

For each USB device model an official USB vendor ID (VID) is required. Vendor IDs must be unique and will be assigned by the USB Implementers Forum (www.usb.org). Registration fees will be charged.

Thesycon Usb Driver Windows 10 Download

Thesycon owns a USB vendor ID and provides a subset of product IDs (PID) to licensees of Thesycon drivers.

Thesycon Usb Audio Driver

© 2021 THESYCON